Unidirectional Indonesian Standard Carbon fiber CFRP fabric for building retrofitting
Weight: 300gsm
Density: 1.8g/cm³
Packing: 100 meters/roll
Width: 100mm, 200mm, 300mm, 500mm or to be customized.
Storage Condition:Store dry at 40°-95° F(4° -35°)
Shelf Life: 50 years
Color:Black
Carbon Fiber Type: 0° (unidirectional)
Unidirectional Indonesian Standard Carbon fiber CFRP fabric for building retrofitting
Carbon fiber reinforced polymer fabric (CFRP fabric composite strengthening system) for structural strengthening, repairing and retrofitting of masonry, concrete, steel and wooden substrates. CFRP fabric composite strengthening of columns,beams,slabs,walls,piles,pier caps in building,bridge,highway,railway,tunnels,piers and civil airport.
CFRP fabric strengthening of existing structures can involve complex evaluation, design, and detailing processes, requiring a good understanding of the existing structural conditions along with the materials used to repair the structure prior to CFRP installation. The suitability of CFRP for a strengthening project can be determined by understanding what FRP is and the advantages it offers, but more importantly, its limitations.
Key Features of CFRP Fabric
• Flexible
• High strength
• High modulus
• Easy to install
• Long shelf life
• Light self weight
| Testing project | Standard |
| High Strength Grade 1 |
| Tensile strength | ≥3400 MPa |
| Tensile modulus of elasticity | ≥2.3×105 MPa |
| Elongation | ≥1.6 % |
| Bending Strength | ≥700 MPa |
| Layer cutting strength | ≥45 MPa |
| Cohesive pulling strength with base materials | To concrete and brick materials, ≥2.5 MPa |
| Thickness | 0.167mm |
Application
Basements Driveways
Patios Pools
Small Industrial Parking Garages
Buildings Bridges Piers/Wharfs Tunnels
Roads Sidewalks Stadiums Shopping Malls
Schools Dams Tanks/Silos Pipes
Blast Reinforcement
Military
How to Use CFRP Fabric
• Surface treatment
• Applying primer
• Leveling
• Applying carbon fiber adhesive
• Externally bonded carbon fiber reinforced polymer(CFRP) fabric
• Applying carbon fiber adhesive again
• Curing and protecting
Preparation works
Surface must be clean and sound. It may be dry or damp, but free of standing water and frost. Remove dust, laitance, grease, curing compounds, impregnations, waxes, foreign particles, disintegrated materials and other bond inhibiting materials from the surface. Existing uneven surfaces must be filled with an appropriate repair mortar. The adhesive strength of the concrete must be verified after surface preparation by random pull-off testing (ASTM D 4541) at the discretion of the engineer. Minimum tensile strength required is 200 psi (1.4 MPa) with concrete substrate failure (typical).
Product Tags:
|
|
Unidirectional CFRP Fabric , Carbon Fiber Woven Fabric Building Retrofitting Application Images
|
